MX3110 print jobs rendering

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mttech
    Trusted Tech

    100+ Posts
    • Mar 2014
    • 127
    #1

    MX3110 print jobs rendering

    I have an MX3110 that is locking up when larger file size jobs are sent to print and saying rendering in job status. Updated firmware with no difference. I see quite a few mentions of memory when I did a search for this problem so I swapped the DIMM memory 1 (image memory for MFP PWB) with DIMM memory 3 (memory for printer) and copier would not give the green light on OP panel to turn on, so I "assume" the memory is bad. Am I on the right track here and if so do I have to get this memory from Sharp or is there another source? I do not have another copier to swap memory with to test. Any help is appreciated.
    Tags: None
    • ZOOTECH
      Senior member of CRS

      Site Contributor
      2,500+ Posts
      • Jul 2007
      • 3375
      #2
      Re: MX3110 print jobs rendering

      Originally posted by mttech
      I have an MX3110 that is locking up when larger file size jobs are sent to print and saying rendering in job status. Updated firmware with no difference. I see quite a few mentions of memory when I did a search for this problem so I swapped the DIMM memory 1 (image memory for MFP PWB) with DIMM memory 3 (memory for printer) and copier would not give the green light on OP panel to turn on, so I "assume" the memory is bad. Am I on the right track here and if so do I have to get this memory from Sharp or is there another source? I do not have another copier to swap memory with to test. Any help is appreciated.
      Two different size memories on that board (1GB and a 2GB) - switch them back and use TC to test DDRs.
      In the print preferences, change the font from 'Resident' to 'Download', and see if that helps.
      "You can't trust your eyes, if your mind is out of focus" --

        Comment

        • ntbann
          Senior Tech

          500+ Posts
          • Jan 2012
          • 626
          #3
          Re: MX3110 print jobs rendering

          Call memory experts.

            Comment

            • Akitu
              Legendary Frost Spec Tech

              Site Contributor
              2,500+ Posts
              • Oct 2010
              • 2595
              #4
              Re: MX3110 print jobs rendering

              I'm going to assume you're trying to print PDFs. Switch from Adobe AcroCrap reader to literally ANYTHING else. I recommend Foxit PDF reader.
              Cthulhu for president! Why settle for the lesser evil?

                Comment

                • mttech
                  Trusted Tech

                  100+ Posts
                  • Mar 2014
                  • 127
                  #5
                  Re: MX3110 print jobs rendering

                  Thanks for the replies. Senior moment on memory, tested memory and they were good. Changing font made no difference. They are using Cute PDF Reader. Turned out to be in their network, data transfer was to slow and bigger jobs were timing out.

                    Comment

                    • ZOOTECH
                      Senior member of CRS

                      Site Contributor
                      2,500+ Posts
                      • Jul 2007
                      • 3375
                      #6
                      Re: MX3110 print jobs rendering

                      Originally posted by mttech
                      Thanks for the replies. Senior moment on memory, tested memory and they were good. Changing font made no difference. They are using Cute PDF Reader. Turned out to be in their network, data transfer was to slow and bigger jobs were timing out.
                      Thanks for the update.
                      "You can't trust your eyes, if your mind is out of focus" --

                        Comment

                        Previous template Next
                        Working...