sharp ar-m450 scanning system

[salo ventura]

I have a problem with a copier ar-m450 and delete the scanning system and can not scan because I do not have the key to activate the escanner again, there is any way to revive the scanning system. help please

[mtech]

You need the serial number of the machine and the application number of the NSX1. Then you need to contact Sharp through a dealers site that the product keys are issued and request the key be reissued. Good luck as Sharp is very wary about issuing product keys.

[nightshade]

Be ready to provide proof of purchase of the NS, otherwise they will not deal with you.

[Sharp Fixer]

enable scan demo version

a temp workaroun may be to enter code 26-10
it will allow enabling the demo version of scan mode and will allow i believe 500 or 1000 scans

[geisener]

where do you enter that code

[jpcopy]

I can't help with your problem but what does the scanning set up cost from sharp. wholesale and retail if anyone knows or about.

[Dean]

The last time we bought the scan software it was $700 but I think that it has went down to $350.

Dean