Mx2600m display intermittently locking up

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dpoutz
    Technician

    50+ Posts
    • May 2011
    • 78

    #1

    Mx2600m display intermittently locking up

    wE HAVE A MX 2600M LOCKING UP VERY IN FREQUENTLY. WHEN IT DOES DISPLAY READS PLEASE WAIT AND NOTHING CAN BE DONE UNLESS YOU POWER DOWN. WE TRIED CONTROLLER DIMMS FIRMWARE. HAS ANYONE ELSE SEEN THIS THANKS THERE IS A PIC OF OP PANEL BELOW THANKS We also replaced HDD
    Attached Files
    Last edited by dpoutz; 11-04-2014, 04:29 PM.
  • DAKOTADAN
    Technician

    50+ Posts
    • Jan 2011
    • 61

    #2
    Re: Mx2600m display intermittently locking up

    Replace the USB Conversion Board PWB ,part#CPWBN1833FCE4
    It sits under the slide out keyboard.
    Good Luck.
    Dan.

    Comment

    • gomarlins
      Technician
      • Jan 2014
      • 13

      #3
      Re: Mx2600m display intermittently locking up

      Sharp Authorized Wholesaler of Photocopiers
      We carry Sharp supplies, parts and machines
      Toner flyer-9-16-13 - Copy - Copy.jpgMX5001B.jpg
      Ronald Rivera
      ronald.rivera@outlook.com
      InternationalDigital Solutions
      (305)593-8700
      1507 NW 82 Ave.
      MiamiFlorida 33126
      WWW.idscopier.com

      Comment

      • colgrimes
        Technician

        50+ Posts
        • May 2012
        • 64

        #4
        Re: Mx2600m display intermittently locking up

        Originally posted by DAKOTADAN
        Replace the USB Conversion Board PWB ,part#CPWBN1833FCE4
        It sits under the slide out keyboard.
        Good Luck.
        Dan.
        This is the correct answer. Too many people slamming in the keyboard after using it. We unplug them if they customer doesn't use it, otherwise it has to be replaced.
        CopierCollin.com
        Hybrid Honest Sales/IT

        Comment

        Working...