Sharp MX 4100n displays "Automatically Adjusting"

[Deer John]

I have this machine at a very fussy account and they are complaining that the machine gives this message and makes them wait 15 seconds or so most every time they use is from standby.
I can't find any references to this message in the Svc manual so any general guidance would be appreciated

[colgrimes]

Re: Sharp MX 4100n displays "Automatically Adjusting"

Unfortunately that was one of the worst issues with that series, and it's predecessor.

I know they released a couple of firmware updates to help with the frequency of the adjusting. My suggestion would be to make sure the firmware is current.

-Copier Collin

[spanky]

Re: Sharp MX 4100n displays "Automatically Adjusting"

See attached bulletin from Sharp

[mojorolla]

Re: Sharp MX 4100n displays "Automatically Adjusting"

You can adjust when process control kicks in with SIM 44-28.