Export and Import settings for sharp MFP's

[redserv]

Hey guys so I need some information concerning exporting and importing of MFP settings, So when a customers rental lease is finished after a specified time, example with a MXM453N and we switched a new MFP to the client example MX465N or any other MFP,what simulations and export settings should i do to get the customers MFP back up to what it was in the old MFP, example Network settings,Address Book Settings ,Fax settings,Document Filing settings, Basically i want to Completely backup the old MFP to the New and just have it working as before, can you guys guide me through this?Thanks in advance.

[redserv]

Re: Export and Import settings for sharp MFP's

guys anyone have any information on this? i will be very grateful for some feedback.

[tr210907]

Re: Export and Import settings for sharp MFP's

You will need to login into the mfp's webpage and under system settings -there will be section for backing up settings and device clone do both.. Then save these .bin files were you can access them when you go to import on new machine..

[redserv]

Re: Export and Import settings for sharp MFP's

hey thanks alot TR2 appreciate the help.

[redserv]

Re: Export and Import settings for sharp MFP's

Hey guys one more thing,Can I backup settings from any MFP to the other? Or should I stay within the same Family EG. MXM363N and MXM365N

[tr210907]

Re: Export and Import settings for sharp MFP's

Hey guys one more thing,Can I backup settings from any MFP to the other? Or should I stay within the same Family EG. MXM363N and MXM365N

I just backed up settjngs from 3 - 5001s and 8 623s importkng them to 3 - 5141s and 8 754s with out any issue

[redserv]

Re: Export and Import settings for sharp MFP's

Wow, that's really good to hear, I will take this information as you can import/export between different model MFP's.

[tr210907]

Re: Export and Import settings for sharp MFP's

[QUOTE=redserv;477079]Wow, that's really good to hear, I will take this information as you can import/export between different model MFP's.[/QUOTE


i have not had much luck going from AR to MX but within MX series yes also if machines have DSk you will need to use password

[faxman28]

Re: Export and Import settings for sharp MFP's

here's something to make it more confusing


MFP-TB-611R.PDF

[redserv]

Re: Export and Import settings for sharp MFP's

thanks alot guys.