MX-4100n Wont boot

[Cookr]

OK working on an MX-4100n and it was having problems with it sucking up all the Cyan DV found a solution on this wonderful site (at least I hope so) to replace the Process electrode case (part # PCASZ0312FCZ2) and the springs that go with it, so I did that but after i put it all back together when I turn it on it begins to boot up but will not finish the screen will not turn on but in the background I can see the boot screen and also something weird when I open and shut the front door the screen blinks for a split second. I've checked the wiring multiple times and i don't see anything wrong but I can not figure it out any help would be great. Thanks

[igi]

Re: MX-4100n Wont boot

always recheck the last thing you did,
did you do firmware upgrade?

[jp74msj55]

Re: MX-4100n Wont boot

OK working on an MX-4100n and it was having problems with it sucking up all the Cyan DV found a solution on this wonderful site (at least I hope so) to replace the Process electrode case (part # PCASZ0312FCZ2) and the springs that go with it, so I did that but after i put it all back together when I turn it on it begins to boot up but will not finish the screen will not turn on but in the background I can see the boot screen and also something weird when I open and shut the front door the screen blinks for a split second. I've checked the wiring multiple times and i don't see anything wrong but I can not figure it out any help would be great. Thanks

Sounds like dv unit is causing short to ground. Did you try to remove dv unit and boot machine back up?

[Cookr]

Re: MX-4100n Wont boot

Well I removed the dv units and gave it another try and did the same thing. Going to try and swap some boards and see if anything works