wait

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • esam ramadan
    Trusted Tech
    • Feb 2008
    • 199

    #1

    wait

    hello every body i have this message" WAIT " after every copy
    the toner is ok developer+ thermestor+ hhd ok so what ?
    problem in e230-233-232-2820c
    thanks for any ideas
  • Riyadh hossain

    #2
    Re: wait

    Originally posted by esam ramadan
    hello every body i have this message" WAIT " after every copy
    the toner is ok developer+ thermestor+ hhd ok so what ?
    problem in e230-233-232-2820c
    thanks for any ideas
    I think
    1) cause of low voltage, use stabilizer to prevent this problem
    2) thermestor
    3) heater lamp screw loosen
    4)adjust heater lamp temperature (0+8>410)

    Comment

    • djbass
      Trusted Tech

      100+ Posts
      • May 2008
      • 165

      #3
      Re: wait

      One way or the other the fuser is not getting to the temperature the machine is expecting, that 'wait' is the machine attempting to adjust temperature accordingly.

      9/10 times I've had this happen it was due to dirty/faulty thermistor, I've also had it occur when the fuser was long overdue for a rebuild.
      No, I will not send you Manuals, Software or your own little repair Genie to fix all your problems for you.

      Comment

      • esam ramadan
        Trusted Tech
        • Feb 2008
        • 199

        #4
        Re: wait

        thanks for replies guys

        Comment

        Working...