Don't forget...the OS is Linux based..Along with the OS CD, you will need the HDD partition CD. Won't work with a normal windows format. Also for some additional troubleshooting help on the GL10X0, hook a monitor up to the video port. This is a great tool to watch while the system is booting because you can see actual error messages (more that "controller is bootong"). Helps with other errors like memory, MFP interface issues etc. Ed
-
If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals. -
same problem
i also am having this issue. can I get a copy of the link for the os for gl-1010?
please?Comment
-
Check your mailComment
-
i've check my mail, but there is nothing, could you mind resend its again, pleaseComment
-
Like I said, it's not free. If you're interested in purchasing it, send me an email to Paul@justmanuals.comComment
-
Comment
-
Re: OS for Toshiba e-studio 35 GL-1010
Greetings! I have the Toshiba eStudio 35 and hav ethe issue with the Starting Controller. I purchased a new HD. I just need the dirvers and OS. Your posts states you have this. I would apprecaite it if you could email the iso or info where I can find obtain this. I check the copier.toshiba link but found nothing fo rthe estudio 35. I have a fresh HD but no OS and drivers. Your help is greatly appreciated. Thanks! Jessie jmorata01@gmail.comThe file is a 600+ meg .iso file. I will upload it to my server then send you a download link to the email address you supplied. Because of the size of the file, you will need patience while it downloads ... my server is not exactly a speed demon. Give me a couple of hours, and I will send the link. Good luck.
Oh, as for the software drivers, you can get them at the following link:
Comment
-
Re: OS for Toshiba e-studio 35 GL-1010
I have the system software disks for GL1010+1020, GA1040, GA1110, GA1140 - for e-studio 28-35-45, e-studio 550-650-810 and others.Comment
Comment