[Misc] toshiba 306 error F901

[chelsy11]

helo guys, i have a problem with toshiba 306 error F901, i buy a new board and change it i put the old battery and 8pin ic on the new board. the machine gets ready but when i try copy it says please wait and go back to ready mode without printing, i also try to make print a counter and its jams on registration. is there anything i missed

[Sriyanjan]

Re: toshiba 306 error F901

engine speed mismatch or error, do you changed lgc pcb ?

Sent from my HTC Desire 820s dual sim using Tapatalk

[chelsy11]

Re: toshiba 306 error F901

engine speed mismatch or error, do you changed lgc pcb ?

Sent from my HTC Desire 820s dual sim using Tapatalk

which one is the logic board? im sorry im a newby in toshiba. im pointing the board connected to the laser unit i dont know the name of it but it has a battery and one 8pin ic which is removable. i buy a new board and put the old battery and ic on it and the error is gone but i cannot make a print, when i use the adf it feeds the paper and after a while its go back to ready mode without printing, i also try to print the counter and its jam on registration

[chelsy11]

Re: toshiba 306 error F901

hello guys, i need the firmware of toshiba 306se red dot i think it will help to solve my problem. if you dont mind please send me a link to download

[didi2005]

Re: toshiba 306 error F901

System board got hdd, sram, ram
Logic board beside system with many connectors