toshiba e studio 2540c service mode message still works fine

[ccwilliams3]

serviceerror.JPG This message is at the bottom left of the control panel, the machine works great just trying to figure out with this is and how to get it off the machine.

[gliderider]

Re: toshiba e studio 2540c service mode message still works fine

Hi:

You're in Factory Service Mode which means the copier will not count in this mode. To shut it off power up while holding down the 0 and 8 keys and input 9010 then change it from a 1 to a 0. Power down then back up and you will be in regular mode again.

Andrew

[MUMMIM]

Re: toshiba e studio 2540c service mode message still works fine

Hi:

You're in Factory Service Mode which means the copier will not count in this mode. To shut it off power up while holding down the 0 and 8 keys and input 9010 then change it from a 1 to a 0. Power down then back up and you will be in regular mode again.

Andrew

same the code 08-203 older model?

[ccwilliams3]

Re: toshiba e studio 2540c service mode message still works fine

Thanks so much dude that was it!

Hi:

You're in Factory Service Mode which means the copier will not count in this mode. To shut it off power up while holding down the 0 and 8 keys and input 9010 then change it from a 1 to a 0. Power down then back up and you will be in regular mode again.

Andrew

[Pech chamnap]

Re: toshiba e studio 2540c service mode message still works fine

Hi:

You're in Factory Service Mode which means the copier will not count in this mode. To shut it off power up while holding down the 0 and 8 keys and input 9010 then change it from a 1 to a 0. Power down then back up and you will be in regular mode again.

Andrew

Thanks you