F350 WHEN UPDATE FIRMWARE e355

[ANOL]

Hi all!

i updated new firmware v335 (red dot) for e355, it complete all, power off and power on the machine, it is norman 1 second add show f350, i reupdate older version it is too.

help me fix this problem. thks

[laitang]

Re: F350 WHEN UPDATE FIRMWARE e355

Did u perform service mode 08-947 after updating firmware?
print the version list of your mc?

[ANOL]

Re: F350 WHEN UPDATE FIRMWARE e355

Did u perform service mode 08-947 after updating firmware?
print the version list of your mc?

yeah of course ! 08-947 - 693 - 690 ; C3 -1 ...

is there any idea ?

[riyadh hossainbd]

Re: F350 WHEN UPDATE FIRMWARE e355

Hi all!

i updated new firmware v335 (red dot) for e355, it complete all, power off and power on the machine, it is norman 1 second add show f350, i reupdate older version it is too.

help me fix this problem. thks

Just replace slg board and reupdate firmware

[vodo]

Re: F350 WHEN UPDATE FIRMWARE e355

Hi all!

i updated new firmware v335 (red dot) for e355, it complete all, power off and power on the machine, it is norman 1 second add show f350, i reupdate older version it is too.

help me fix this problem. thks

Did you re-formatted HDD before you load back its old version?

[ANOL]

Re: F350 WHEN UPDATE FIRMWARE e355

Just replace slg board and reupdate firmware

oh ! i am repairer, i am not replacement

[ANOL]

Re: F350 WHEN UPDATE FIRMWARE e355

Did you re-formatted HDD before you load back its old version?

yeah! i done it , c3 - 2

help me pls

[ablepe]

Re: F350 WHEN UPDATE FIRMWARE e355

yeah of course ! 08-947 - 693 - 690 ; C3 -1 ...

is there any idea ?

With 690 you formated hdd again...update firmware and initialize 08-947 only

Sent from my G620S-L01 using Tapatalk

[Vincent128]

Re: F350 WHEN UPDATE FIRMWARE e355

Hi all!

i updated new firmware v335 (red dot) for e355, it complete all, power off and power on the machine, it is norman 1 second add show f350, i reupdate older version it is too.

help me fix this problem. thks

Do you have a red dot machine?
You probably do not and need the non 'N' version

It's also easy to really mess up the SLG firmware putting on the incorrect version which will require the factory recovery jig

[ablepe]

Re: F350 WHEN UPDATE FIRMWARE e355

F350] SLG board abnormality (1) Check if the conductor pattern on the SLG board is short circuited or open circuited. (2) If there is no problem found in the check (1) above, check the combination of the firmware version of the system ROM, engine ROM and scanner ROM. Reinstall the scanner ROM firmware. (3) If an error occurs after step (2) above has been performed, replace the SLG board

Sent from my G620S-L01 using Tapatalk

[ablepe]

Re: F350 WHEN UPDATE FIRMWARE e355

You probably put incorect version

Sent from my G620S-L01 using Tapatalk

[birchcourt]

Re: F350 WHEN UPDATE FIRMWARE e355

With 690 you formated hdd again...update firmware and initialize 08-947 only

Sent from my G620S-L01 using Tapatalk

Verstuurd vanaf mijn SM-A310F met Tapatalk

[ANOL]

Re: F350 WHEN UPDATE FIRMWARE e355

With 690 you formated hdd again...update firmware and initialize 08-947 only

Sent from my G620S-L01 using Tapatalk

i do all it , 690-947...

[ANOL]

Re: F350 WHEN UPDATE FIRMWARE e355

Verstuurd vanaf mijn SM-A310F met Tapatalk

you write by english language pls!

[ANOL]

Re: F350 WHEN UPDATE FIRMWARE e355

Do you have a red dot machine?
You probably do not and need the non 'N' version

It's also easy to really mess up the SLG firmware putting on the incorrect version which will require the factory recovery jig

yeah, I know . when i put 2 foders in USB ( N and non N foder + mentusb2) . 4+9 power , show 2 choices . fist option (non N) can't update, second option is run all 1,2,3,4

power off, power on 08 690 - 947 - 693 . power off, power on ===> f350

no away