We have an Estudio 7506 with tthe GQ-1280 Coin Controller
It is the 12pin interface, not the old style 4pin.
All documentation I can find says to set 08-9016 to 1 or 5 for Coin Controller. When we do this, we cannot lock/unlock the machine.
When we set 08-9016 to 3(key card), it locks/unlocks but doesn't count the clicks.
The cabling has been successful on other machines with the GQ-1280 interface at other sites but I am having trouble configuring the service settings properly and I don't have a contact that was successful with a similar configuration.
I am also aware that these other sites struggled with the same issue but overcame it with some configuration settings that I don't have available at the moment.
It is the 12pin interface, not the old style 4pin.
All documentation I can find says to set 08-9016 to 1 or 5 for Coin Controller. When we do this, we cannot lock/unlock the machine.
When we set 08-9016 to 3(key card), it locks/unlocks but doesn't count the clicks.
The cabling has been successful on other machines with the GQ-1280 interface at other sites but I am having trouble configuring the service settings properly and I don't have a contact that was successful with a similar configuration.
I am also aware that these other sites struggled with the same issue but overcame it with some configuration settings that I don't have available at the moment.