Toshiba eStudio 3055C wont warm up after power outage

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • skibum
    Independent Service Tech
    Site Contributor
    100+ Posts
    • Apr 2009
    • 231
    #1

    Toshiba eStudio 3055C wont warm up after power outage

    Customer lost power and now the Toshiba 3055C when turned on at the main power switch will show the Toshiba splash page aand says on the bottom of the page "Checking System". It will stay this way for approx a minute then the screen goes black and comes back on seconds later repeating the sequence all over again with the same screen.

    Has anyone experienced this on Toshiba? I am a Canon tech.

    Thanks!
    Tags: None
    • SalesServiceGuy
      Field Supervisor

      Site Contributor
      5,000+ Posts
      • Dec 2009
      • 8206
      #2
      Re: Toshiba eStudio 3055C wont warm up after power outage

      A dead HDD. You need a Toshiba SED HDD and the firmware plus the procedures.

        Comment

        • skibum
          Independent Service Tech
          Site Contributor
          100+ Posts
          • Apr 2009
          • 231
          #3
          Re: Toshiba eStudio 3055C wont warm up after power outage

          Does anyone have a source for the HDD and firmware?

            Comment

            Previous template Next
            Working...