Hi guys
my toshiba photocopier has a low counter\
today i get a copy
so my copy come out with a white paper
and tje copy not formed
so i get a test print
but the paper come out white again.
what is your idea?
my toshiba photocopier has a low counter\
today i get a copy
so my copy come out with a white paper
and tje copy not formed
so i get a test print
but the paper come out white again.
what is your idea?
where the problem
؟؟
؟؟
where the problem is likely?
laser or HV board?
(also the image not formed on drum when i open the door while the photocopier was in work)