Toner error

[riyadh hossainbd]

Hi
One of my es2006 copier start button do not work in ready mode but it work on 05 and 08 mode. After performing 08=9090 start button works but it show "toner error" and can not do copy .I have notice some information have changed .First was " M-sram =4 cnd and"
Now it changed to "M-sram =2 mjd". How can I change it to cnd ? My copier is cnd version


Sent from my vivo X7 using Tapatalk

[sakisvas]

Re: Toner error

Hi
One of my es2006 copier start button do not work in ready mode but it work on 05 and 08 mode. After performing 08=9090 start button works but it show "toner error" and can not do copy .I have notice some information have changed .First was " M-sram =4 cnd and"
Now it changed to "M-sram =2 mjd". How can I change it to cnd ? My copier is cnd version


Sent from my vivo X7 using Tapatalk

08-9080 set 4

[riyadh hossainbd]

Re: Toner error

08-9080 set 4

Need to change "M SRAM" to Cnd(4), do you know this code? 08=9080 is for change "Sys SRAM "

[sakisvas]

Re: Toner error

in 08-9060 what is the number? (in this code you can see the destination)

you can change the destination in 08-6080

first change the 08-9010 code from 0 to 1..... do the changes to 08-6080 and again set 08-9010 to 0..