imageRunner 3320G - Copytechnet.com

Dalamar

Trusted Tech

100+ Posts

Join Date: Oct 2006

Posts: 117
#1

imageRunner 3320G

12-28-2006, 02:49 PM

Well the HD went bad (E602-0002) in this one so we replaced it, using a Toshiba MK2023GAS drive. The first dirve i went out with failed halfway through the loading of the system software, so i went back a second time with three HD's that were new and I tested prior to going out and still Canons servtools rejected two of the drives, but it accepted the third. It installed the all of the system software just fine. Upon restarting the machine it coded out again with a E602-0002

Any ideas?

thanks and have a great new years!

Notatechie - "I am trying, but I don't know how to go into Service Mode. If I just go in and press *then 2, than 8, then * it does not do anything."
SCREWTAPE - "Try harder.."
Tags: 3320g, accepted, canons, coded, imagerunner, one, tested