GA 1040 ASD ver

[jawir]

Hi Pro,

I have 1 machine eS35 (NAD ver) as we know this machine is 110-115 V. If I install GA 1040 (printer board) ASD ver will it be a problem? Because in my region voltage that we use is 220-230 V.we are using trafo to make this machine can work in here. Please if there is any advices.
Any advices I will be very apreciated.

thank you and regards

[decimal]

I have used them .They work normally .

[aalex_bom]

DC volt

I have used them .They work normally .

because ga 1040 use DC volt 5v - 12v DC. you can plug PSU of PC to test.
good luck

[jawir]

Hi Brothers,

thanks all of your information, I really apreciate it.

regards