What is the answer fixing the eae0 error code?
I have replaced the finisher pwb, the punch pwb and the conv pwb(ipw).
I have flashed the conv to 1.4 and the punch to v13 (chip from Toshiba said v14) and the finisher to v21 (chip from tosh said v22). The copier (es281c) has been flashed to v329. Tosh said to review the mj1101 troubleshooting guide and flash to v22 finisher and v14 punch. How come it worked at conv 1.2, punch 10, finisher v18 and now it don't work. The only thing I have not done (based on this manual) is the tray wiring harness. I had to wait 2 hours to reflash the chips on friday, since I had to goto another office to get this done.
I have replaced the finisher pwb, the punch pwb and the conv pwb(ipw).
I have flashed the conv to 1.4 and the punch to v13 (chip from Toshiba said v14) and the finisher to v21 (chip from tosh said v22). The copier (es281c) has been flashed to v329. Tosh said to review the mj1101 troubleshooting guide and flash to v22 finisher and v14 punch. How come it worked at conv 1.2, punch 10, finisher v18 and now it don't work. The only thing I have not done (based on this manual) is the tray wiring harness. I had to wait 2 hours to reflash the chips on friday, since I had to goto another office to get this done.
Comment