Toshiba eStudio 200L / 202L Simulations

[kuby]

I have the Service / Parts manual for this machine....but it does not include the Simulations. Is there another manual for this? How to do a proper developer setup? Tests, etc.

=======================

Just found out that this is in the Service Handbook. Anyone have this they could send me. (Toshiba eStudio 200L) Have manuals to trade.

Thanks

[ToshibaTech]

Developer Reference (Auto-Toner Sensor) is 05+Power, Code 200, Start, wait a few minutes the display will change then the value will be fairly stable shoot for 2.35-2.45 (235%-245%) use the arrow to bump it up or down. Press enter, all should be well. It is common for these to get debris on the doctor blade so wedge a transparency sliver or the like down in there to clean it off good if you change dev. Don't forget the bushing on the gear end of the drum.

[JustManuals]

I've already gone through my allotment of free manuals this month, but I do have the 200L service handbook on my site at justmanuals.com.

Paul@justmanuals.com

[kuby]

Got one - Thanks