Hi guys, I'm getting a CA2 code on this machine(H-sync detection error) any ideas on how to fix this? I tried replacing the laser unit and this did not help. This machine has about 280k on it.
-
-
Original procedure is as next:
[CA2]H-Sync detection error
Are the harness connecting the connector (J210) on the PLG board and connector (J215) on
the SNS board open-circuited? Are the connectors disconnected?
YES
Replace the harness. Connect the disconnected connectors.
NO
1. Replace the PLG board.
2. Replace the laser optical unit.
Laser is the last thing.
BRI'll never ask if I didn't check user manual, service manual, parts list, BSI/TNI/TAD... web, existing threads.
Comment