If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Turn Power Of Hold Down 0 & 5 While turning on power This is a mode for setting and adjusting u see AJ Enter 5 then print button u see auto exposure value u increase value print will light and u dicrease value print will dark after enter value press intruppt key for saved value
Manual Exposure adjustment is 1
Auto Exposure adjustment is 5
Hope U solve ur problem
naveed
Originally posted by cucuklotz
HI,
Could you tell me simulation for exposure adjustment?
THANKS Andy
Comment