I did heat rollers on this unit about 5 months ago and unit has been running fine ever since. Then they called here yesterday with a C440 error code so I went here & reset the code. They called back 4 hours later & code came back. Any suggestions on what else to try or replace? Thanks in advance.
-
-
Thermistors.And Star Trek was just a tv show...yeah right! -
If after replace thermistors you got call for service try change power supply."A process cannot be understood by stopping it. Understanding must move with the flow of the process, must join it and flow with it"
"What do you despise? By this you are truly known"
Guess who
Comment
Comment