Hi all,
New here and looking some help. I have two toshiba photocopiers that my ex husband bought at auction with the intention or reselling - but never did anything with it. We split up and I have since moved and "inherited" them and they've been sitting in my garage for about 2 years. Prior to this both were working perfectly. I know I should have done something with them but had lots of other things to sort I would now like to get rid of it and today plugged them in. Here are the results:
E- studio 350 - It starts up but the screen shows only a picture of the printer and the screen. (excuse non tech lang). I let it run for a while but nothing. I saw elsewhere to press and hold 0 and 8 while turning it on but that did nothing. Is it gone? a "friend" suggested it may just be cold? to take "battery" inside ?? Am I wasting my time with this and should I just dump/recycle it or is there any hope? If giving instructions to me pls be gentle and specific as I know nothing about these!
E-studio 2330c - Starts and then says Call for service - F100 - reboot the machine. Thoughts on this please and as per above pls be gentle and specific!
thanks in advance
New here and looking some help. I have two toshiba photocopiers that my ex husband bought at auction with the intention or reselling - but never did anything with it. We split up and I have since moved and "inherited" them and they've been sitting in my garage for about 2 years. Prior to this both were working perfectly. I know I should have done something with them but had lots of other things to sort I would now like to get rid of it and today plugged them in. Here are the results:
E- studio 350 - It starts up but the screen shows only a picture of the printer and the screen. (excuse non tech lang). I let it run for a while but nothing. I saw elsewhere to press and hold 0 and 8 while turning it on but that did nothing. Is it gone? a "friend" suggested it may just be cold? to take "battery" inside ?? Am I wasting my time with this and should I just dump/recycle it or is there any hope? If giving instructions to me pls be gentle and specific as I know nothing about these!
E-studio 2330c - Starts and then says Call for service - F100 - reboot the machine. Thoughts on this please and as per above pls be gentle and specific!
thanks in advance
Comment