Estudio 45 network connection

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • NATAN
    • Jun 2025
    #1

    Estudio 45 network connection

    I would like to connect my estudio 45 through my adsl seimens sl2-141 router which is connected to my computer. I don't really know were to begin as I have little experience in this sort of connection. Any assistance in the way of instructions or related web pages or manuals would be greatly apreciated.
    (I tried the lpt connection but the results were inferior and many documents wouldn't print)
    Tags: connection, control panel, ect, estudio, network, network setup
    • fireater
      Repair God? not quite

      250+ Posts
      • Apr 2006
      • 253
      #2
      hmm

      Well question one does it have a network connection?.. these machines did not come equipped with network printing out of the box... there were two options GA-1040 (internal option if this is equipped you will have a network jack on the side) or GL-1010 (internal as well but it takes the form of a big lump on the lower back of the main copier body. Basically it was a windows nt computer with special hardware) Try to print a config page from the control panel it should show som info. If you cant find a network jack anywhere you are outta luck and that machine is so old its not worth trying to upgrade it. we would like to help but we need to know what options are installed....
      I fix copiers ...Well Sorta

        Comment

        • NATAN
          #3
          The machine I have has a GA-1040 connection with a network jack at the side and I've included a network setup list with this message.

            Comment

            Previous template Next
            Working...