estudio 200L enablers GM-1030 GM-2030 GM-3030

[rdone]

I'm helping a charity try to get more functionality out of an estudio 200L that they were recently donated. It's the basic model with no printing or scanning. Can anyone recommend a source for any of the print/scan enablers, or any other solution that would allow printing/scanning? I've tried ebay and other internet sellers without success. CTN PM reply is fine. Thanks!

[Logged-on]

Re: estudio 200L enablers GM-1030 GM-2030 GM-3030

That model was released in 2004, you will have difficulty finding anything. I know of a wholesaler in Tampa called TNT not sure of any contact information, but they may be able to help you.


DIG-121.pdf

[rdone]

Re: estudio 200L enablers GM-1030 GM-2030 GM-3030

That model was released in 2004, you will have difficulty finding anything. I know of a wholesaler in Tampa called TNT not sure of any contact information, but they may be able to help you.


[ATTACH]53170[/ATTACH]

I tried TNT but they don't have any. Thanks for the recommendation though. I will keep looking.

[rdone]

Re: estudio 200L enablers GM-1030 GM-2030 GM-3030

In the attached page from the 200L/202L/230/232/280/282 service handbook, it says that the GM-1030/GM-2030/GM-3030 enablers only work on the 200L, and do not work on the 230/230L/280/280S. However, it does not say that the GM-1020/GM-2020/GM-3020 enablers only work on the 230/230L/280/280S, and do not work on the 200L.

This post from Mr. Spock says that the GM-1020/GM-2020/GM-3020 enablers do work on the 200L.

Can someone clarify/confirm whether or not the GM-1020/GM-2020/GM-3020 enablers work on the 200L?