If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
when replacing the hard drive do the following
1. Replace hard drive
2 3 + clear power on option 3 start
3 power off
4 0+8 power on
5 690 start 2 start
6 reload firmware via usb thumb drive
7 0+8 power on
8 947 start
9 redo 5
10 power off then on
Comment