If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have a large cassette attached to the copier. When I close front door of the LCT cassette, the paper is not lifted. The lcd of the copier says add paper.
The multipin connector at the rear of the machine cracks causing some of the pins not to connect properly. Users use excessive force when closing this tray. The connector on the rear of the lcf should also be checked.
Comment