Just looking for advice before working on an Estudio-28 that needs developer. Is this a job for the truly experienced Toshiba guy, or is it pretty straight-forward? Should you always peplace the drum when you do developer, or is it like doing the waterpump while you're replaceing the timing belt (for any other gear heads like me...)...just do it since you're already in there?
-
-
If you have to change only developer - it is easy. Remove old. If you are using vacuum cleaner don't forget to de-attach toner sensor. Make doctor-sleeve gap 0,4. In 05 mode do code 200.
Voila.
BRI'll never ask if I didn't check user manual, service manual, parts list, BSI/TNI/TAD... web, existing threads.
Comment