Toshiba e-studio 6530c SLOW print times

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • AMcLaughlin
    • Aug 2025
    #1

    Toshiba e-studio 6530c SLOW print times

    We have just installed two new Toshiba 6530c's at my law firm and all images that are printed take an extraordinary amount of time to print. I have tried updating the copier's firmware, the drive, pcl6 and PS drivers, turning off all advanced printing functions and these things are still printing slowly. Our prior copiers did not have this issue and were connected the exact same way. Looking for any ideas/help.

    Thanks
    Tags: 513, 6530c, activated, amou, australia, color laser, dealing, ect, error message, estudio, estudio 35, fax, hp color laserjet, install, issu, jpg, laser printers, laserjet, lef, loosing, print, print time, slow, spooler, stall, tcp/ip, tech, tested, time, toshiba, toshiba copier, windows server, write, writing
    • TTL
      Trusted Tech

      100+ Posts
      • Dec 2008
      • 127
      #2
      how is the configuration of the tcp/ip port in the drive? is for lpr or raw? is the SNMP activated? and if is in lpr is the count of bytes LPR activate?

        Comment

        • tsbservice
          Field tech

          Site Contributor
          5,000+ Posts
          • May 2007
          • 8020
          #3
          You cannot install those machines unless you are not an autorized Toshiba tech. Call a tech and don't waste our time.
          A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
          Blessed are they who can laugh at themselves, for they shall never cease to be amused.

            Comment

            • ivovb
              Senior Tech

              500+ Posts
              • Apr 2008
              • 695
              #4
              Really, someone buys machines for $$$$$ but won't pay $$/$$$ for professional to set it up rightly.

              One more thing to keep in mind. This forum is not end user hotline.

              BR
              I'll never ask if I didn't check user manual, service manual, parts list, BSI/TNI/TAD... web, existing threads.

                Comment

                • AMcLaughlin
                  #5
                  These devices are on a lease from TOSHIBA, and were installed and setup by a toshiba tech, and they are maintained by them. Toshiba has been unable to resolve the issue thus far.

                    Comment

                    • ivovb
                      Senior Tech

                      500+ Posts
                      • Apr 2008
                      • 695
                      #6
                      It is a pity to hear that.

                      What is your location?

                      BR
                      I'll never ask if I didn't check user manual, service manual, parts list, BSI/TNI/TAD... web, existing threads.

                        Comment

                        • AMcLaughlin
                          #7
                          I am in downtown Cleveland, Ohio

                            Comment

                            • ivovb
                              Senior Tech

                              500+ Posts
                              • Apr 2008
                              • 695
                              #8
                              Too far for me.

                              May be there is a colleague that is more near than me.

                              These machines are newbie in the market so it might be question of firmware/driver update that is still not available. Till than I will suggest you to test HP driver - HP Color Laser Jet 4600 and/or HP Color LaserJet 4550 and/or HP Color LaserJet 8550.

                              Good luck.
                              I'll never ask if I didn't check user manual, service manual, parts list, BSI/TNI/TAD... web, existing threads.

                                Comment

                                • AMcLaughlin
                                  #9
                                  Tried all 3 drivers, and it will not print to any of them

                                  Thanks for the help, anything else would be greatly appreciated.

                                    Comment

                                    • TTL
                                      Trusted Tech

                                      100+ Posts
                                      • Dec 2008
                                      • 127
                                      #10
                                      I have that problem, and was a configuration problem of the tcp/ip.
                                      If you tell me how you configure the tcp/ip in the drive of the machine....

                                        Comment

                                        • AMcLaughlin
                                          #11

                                            Comment

                                            • TTL
                                              Trusted Tech

                                              100+ Posts
                                              • Dec 2008
                                              • 127
                                              #12
                                              no... in the computer drive. like printers-toshiba 6530 print drive-properties-ports-port configuration.

                                                Comment

                                                • AMcLaughlin
                                                  #13

                                                    Comment

                                                    • xcopytech
                                                      Service Manager

                                                      1,000+ Posts
                                                      • Aug 2006
                                                      • 1794
                                                      #14
                                                      try with lpr protocol and queue name print

                                                        Comment

                                                        • AMcLaughlin
                                                          #15
                                                          Issue persists with LPR set.

                                                            Comment

                                                            Previous 1 2 template Next
                                                            Working...