If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Have this equipment in the shop and need to install it in customer office ASAP. If someone can send me this firmware I would appreciated. My email is mbsproducts@hotmail.com .
Which version is on the machine? It may take two updates to bring it current. Also why does it need the firmware? Unless there is an error of hard drive replacement the firmware update may not be required only recommended.
did you have the firmware 350-450, if you still want pm with me i shall send to you latest firmware.
Originally posted by impaqsol
Have this equipment in the shop and need to install it in customer office ASAP. If someone can send me this firmware I would appreciated. My email is mbsproducts@hotmail.com .
You should check your firmware first whether it's already latest or older ver... latest would be ver4006.And this is the last firmware for 350-450.
hello
can any one help me with this problem I think is a firmware problem but not so sure
I have this toshiba 350 that does not start printing when the start button is pressed makes the acoustic sound and then nothing happens the screen is in ready state
when the machine is first powered on and I press start button the machine prints after that it does not print any more.
so it prints in auto start then nothing
thanks
Comment