toshiba e16/20/25 adding toner

[Guest]

anyone hving this type of problem:

e16/20/25/
the tonertank is full of toner
but the toner keep on adding untill the toner tube empty
then the drive gear spoilt
what i hv tested :
toner sensor
new dv
new drum

[Harry]

toner

have to check tr sep unit for arcing change the unit and look for bad conectings at the rear side of copier.there was a tec info for this problem that change the whole hv connection with a double cable to eliminate the contacts.
hope this help

[ken5]

thx HARRY
i will try

[Guest]

Have you changed the hole process unit not just the drum abd dev?
Check the drum earth.

[ToshibaTech]

Does the add toner drive all the time? Can you start it in 03 mode and not turn it off in 03 mode? You might have a short to ground on the motor itself, or a faulty board.

[ken5]

thx to every 1
i will check on the 03 mode & drum earth

[mitsubee]

Please make sure that the machine is done by yourself only you go and give it a thru out check....if that is done by teong then u better bring it back to your office and let teong settle it..