I have a couple of these machines and some work great and some not too great. I have two codes a CE90 and a CE50. Havent been able to figure these out any ideas.
-
-
This Parts & Service manual as well as the Service Handbook can now be purchased for $11.77 and downloaded immediately after payment from The Internet's largest collection of manuals
Paul@justmanuals.com -
CE50 Image quality control related service call
Temperature/humidity sensor abnormality: The output
value of the temperature/humidity sensor is out of the
specified range.
CE90 Drum thermistor abnormality: The output value of the
drum thermistor is out of the specified range.Comment
-
I've never seen those codes not that it couldn't happen... is the machine in a warehouse or in an area not climate controlled?I will not give you service manuals or firmware.Comment
-
As for CE50 if occurs in es3511/4511 then the automatic image sensor *poof* kaput...
CE90 your drum side section might be very dirty preventing the thermistor to sense the correct value of the drum.
ThanksComment
Comment