E-Studio C281-----C360 code?

[wulffservice]

Any info on this code would be appreciated.....thanks!

[sdrawkcab]

It's the Main charge wire cleaner motor, usually it's not engaged correctly into the cleaner unit so the cleaner doesn't reach the limit sensors.

[wulffservice]

Thanks for your assistance

we'll go take a look at that.

[emujo]

Usually caused by the drum carriage not seating fully into the cavity. Just 1-2 mm can cause the gear to not engage. There was a bullitin that addressed this issue a few years ago. If you need it let me know. Emujo

[Guest]

Juat turn it off in the 08 codes.
It never cleans the wire anyway.