studio 165 / 230

[TTL]

Hi..
In this two models, in print and copy mode, she made a risk in the margin of the leaf, in the last mm of the leaf.
And the copy looks like it's dirty.
Changed the drum, bl, developer.
Some idea?

[ivovb]

Check/Clean Main and Tr coronas and housings.

BR

[TTL]

I already clean but still doing the same..
principally the risk. In one of the edges of the paper, they write a risk, with less then 1 mm thick. this is in the last mm of the paper, in the bottom of the paper.

[ivovb]

Can you scan and show the problem - attach the image to your post.

BR

[Naveed Shahid]

test one page through computer

hello

can u print one page via computer may be u solved ur problem i think laser unit need cleaning
naveed

Hi..
In this two models, in print and copy mode, she made a risk in the margin of the leaf, in the last mm of the leaf.
And the copy looks like it's dirty.
Changed the drum, bl, developer.
Some idea?

[TTL]

thanks..
print from a computer it's the same. but the laser is clean.
I think it's solved,I go test to see if it's really all good, and then I post here the solution and a scan of the problem.