Toshiba 3511 Transfer Belt Replace

[gitana1983]

Hi everybody,

I need to have detailed instructions on how to take out the Transfer Belt Unit from a Toshiba E studio 3511.

We have the Service manual, but still we need something more detailed cuz it has not been posible.

If anybody could help me I would greatly appreciate it.

[fireater]

i will email u a pdf send me address

i have a pdf snippet from the manual on 3511 belt removal can we post it on the site somewhere permanent so we can just tell people to look there? so many people ask this question

[gitana1983]

Email

i will email u a pdf send me address

i have a pdf snippet from the manual on 3511 belt removal can we post it on the site somewhere permanent so we can just tell people to look there? so many people ask this question

thanks for your help. You can email me at gitana1983@hotmail.com

[JustManuals]

The posting of copyrighted materials ( service manuals or snippets from manuals) is not allowed on this site. These are the rules you agreed to when you joined. Failure to comply is cause for deletion of your account. If you want to send something to somebody, do it in email or message.

Moderator.

[copyalbania]

Hello to everyone,

I have also need to change the transfer belt of toshiba, but i have opened the machine and also i have seen the service manual but i dont know still what to do.
Please can anyone send me any brochure in changing the transfer belt please?

my e-mail is : copyalbania@hotmail.com

[emujo]

If you have the service manual, that explains the process pretty plainly. Most techs forget the rear screws that run through the TBU into the rear frame. Emujo

[ToshibaTech]

Make sure you vacuum that pig of a machine --completely-- out and clean the slit glass before you put it back together, or else you'll kick yourself later. Also ... clean the two sensors over the revolver unit and the image quality sensor in the middle under the belt near the 2nd transfer position (it's under a spring loaded shutter.)