GL 1020 problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • makaule
    Technician

    50+ Posts
    • Jan 2009
    • 74

    #1

    GL 1020 problem

    I have problem with a Toshiba E-Studio 650.
    "Starting Controller Please Wait". Won't come out of wait.

    I'm new with that modela.. Have 2 pcs one e-st 650 and one e-st 550. No service manual and no recovery or other cd. Don't know where to start from..
    Is it possible to clone hdd from working one ?

    Help please..
  • fireater
    Repair God? not quite

    250+ Posts
    • Apr 2006
    • 253

    #2
    i believe you could clone them...they run linux i believe .. it would be better to get the firmware and replace the hdd tho. newer firmware was sposed to make hdd last better
    I fix copiers ...Well Sorta

    Comment

    • emujo
      Field Supervisor

      2,500+ Posts
      • Jun 2009
      • 3009

      #3
      Yes, Norton Ghost is excellent for this, we had to replace over 100 drives for a customer that had security concerns. This saved us many hours of travel and screwdriver time. The ghosted drive will work in any GL10X0 controller. EMujo
      If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

      Comment

      • makaule
        Technician

        50+ Posts
        • Jan 2009
        • 74

        #4
        Thanks you very much.. I'll try to clone hdd with Acronis true image.

        Comment

        • makaule
          Technician

          50+ Posts
          • Jan 2009
          • 74

          #5
          Clonin HDD with Acronis took about 3 hours but helped to solve the problem.. Next time i'll try CDs..
          Thank you very much and waiting for Recovery CD link..

          Comment

          Working...