e-352 Latest Firmware

[Claudio]

Does anyone happen to have the lastest e-352 firmwares that I can download or receive via e-mail?
I would greatly appreciate it.
I have access to FYI up to 28 ppm so the e-352 I do not.
Claudio

My e-mail : claudio.guillermo@yahoo.com

Have a great weekend!

[Harry]

check your mail
have a nice week

[vinhsesco]

check your mail
have a nice week

DEAR hARRY
I NEED FIRMWARE ESTUDIO 352
EMAIL : vinhsesco@gmail.com
thank you very much

[Claudio]

I did not receive the e-mail you sent

Good morning Harry:
I want to say thank you for your help.
However, I did not receive this e-mail.
Is there any chance you could try resend it?
Thanks again.
Claudio

claudio.guillermo@yahoo.com

[Claudio]

Just received the link

I just got the link. I'll down load it.
Thank you very much.
Have a great weekend.
Claudio

[vinhsesco]

I just got the link. I'll down load it.
Thank you very much.
Have a great weekend.
Claudio

Hi claudio
you just got the link. you can send the link to email: vinhsesco@gmail.com

Thank you very much.
Have a great weekend

[Claudio]

vinhsesco :
I forwarded the e-mail to you.
Have a great weekend.
Claudio

[vinhsesco]

vinhsesco :
I forwarded the e-mail to you.
Have a great weekend.
Claudio

Hi Claudio !
I had receive it and i just download successful
thank you very much

[Luong Nam]

Toshiba e-studio 352 firmware

Dear Harry !
Please help me.
I need e-studio 352 firmware for update my copier.
Can you send it to me ?
thank you very much.
email: phucvuthusach@live.com

[Harry]

Hi please check your mail

[xuanquanghh]

he claudio

plese send me fimware E-352?
email: xuanquangmvp@gmail.com
thank

[fisherman10]

is there a guide somewhere which explains how to update firmware for these machines like 230/280, 350/450, 352/452?
i see the service manual, it says i can either use some usb device, some kind of jig or through a serial connector but i dont really get it. anyone care to explain more?

if possible send me the firmwares too - fisherman10@gmail.com

Thanks a lot for your help.

[ameritech]

Hi, was wondering if you can send it to me also. Thank you pon@ameritechbusiness.com