e-studio 45 help for service and code list

[amirshkh]

hello to all my friends
i need toshiba e-studio 45 service manual
and code list to know what is the error is
my email : osd_screen@yahoo.com
thansk

[bojans]

hello to all my friends
i need toshiba e-studio 45 service manual
and code list to know what is the error is
my email : osd_screen@yahoo.com
thansk

Tell us which code?

[amirshkh]

when the system show call for service and i hold 8 + clear
thank you

[bojans]

If your machine stops it will show an error, you don't need to hold 8+clear. But if says Time for maintenance you should reset 08+252 to 0 (08+POWER ON) type in 252, 0, enter.
Good luck

[amirshkh]

If your machine stops it will show an error, you don't need to hold 8+clear. But if says Time for maintenance you should reset 08+252 to 0 (08+POWER ON) type in 252, 0, enter.
Good luck

thanks
machin is work now but i want to know when the machine showed call for service and i see the code i can understand what is that error
for example: e74 , e20 , e3e , eo1 , e02 , e44 , e04
code are type in the list when holding start+9 , 102 , start last page error history

[amirshkh]

holding 8+0 , 351 start and set to 0
counter is showed 0 after that counter is not work (no page counting)
counter in job status showed 0 and after 100 copy is showed 0 not 100

[amirshkh]

there is nobody can answer me??????????

[bojans]

Sorry man, i didn't read well, thought we were talking about eStudio 450.
I don't have SM for this type.

[JustManuals]

This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment
from The Internet's largest collection of manuals


Paul@justmanuals.com

[tech07]

E45

To start meter do 08/203 change to work

[amirshkh]

To start meter do 08/203 change to work

thank you so much
work fine now
i want to know how can i get total counter of the machine
all page for example (a3,a4, a5) or for each one
thank

[tech07]

E45

Did you replace any boards?

[amirshkh]

Did you replace any boards?

no i dont
why?