hi all

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mr_toshiba
    mr_toshiba of egypt
    • May 2007
    • 3

    #1

    hi all

    hi all
    I have a Toshiba E-STUDIO 250 my problem is over tonar how i can adgust toner suplauy
    already replaced dev tank The problem persists. HELP ANYONE
  • JustManuals
    Field Supervisor

    5,000+ Posts
    • Jan 2006
    • 9838

    #2
    This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment
    from The Internet's largest collection of manuals


    Paul@justmanuals.com

    Comment

    • ivovb
      Senior Tech

      500+ Posts
      • Apr 2008
      • 695

      #3
      Originally posted by mr_toshiba
      hi all
      I have a Toshiba E-STUDIO 250 my problem is over tonar how i can adgust toner suplauy
      already replaced dev tank The problem persists. HELP ANYONE
      Let's say it is a bug. You have to check if your machine has these by-pass cables going from macine to the right door (one black and one red). Also clean all of the contacts on PU and relevant in the machine.

      BR
      I'll never ask if I didn't check user manual, service manual, parts list, BSI/TNI/TAD... web, existing threads.

      Comment

      • Harry
        Trusted Tech

        100+ Posts
        • Feb 2009
        • 228

        #4
        over toner

        Ok Mr. Please check Side Door at front there are connections for high voltage on the rear side. Somthimes there is allot of space at front so you have to put a large screwdriwer at the front hinge turn it arround to reduce the space. Another one is the sensor contact in the pcu have check and ajust the contact of the toner sensor at the left under side of pcu one screw and it flips away.Make shure there is a good connection.
        good luck harry

        Comment

        Working...