cee0 e-studio 281

[TTL]

Hi.
I have one e-studio 281 with 700.000 copies.. and she is always giving the error cee0, I already clean the sensors in the transfer belt and the reflectors inside the belt.
Now she sometimes work fine and other times give this error..
I think that the reflectors aren't 100%. the reflect it's not good..
For what I could see, the transfer belt it's not a consumable, and it's a lot expensive.. And this machine is in contract.
Someone already try change the reflectors inside the belt? or have another idea?
Thanks in advance

[emujo]

If you've never changed the belt, it is way beyond the service life. Reflectors are probably about ready to fall off the belt by now. If it's under contract bite the bullet and replace it. EMujo