Help me-ESTUDIO 650 -Error CANNOT SET NVRAM FLAG when update firmare white PC

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Dongcb
    • Jun 2025
    #1

    Help me-ESTUDIO 650 -Error CANNOT SET NVRAM FLAG when update firmare white PC

    E-Studio 650 help please
    I update firmware to Toshiba 650 copier via PC (OS win98),but error CANNOT SET NVRAM FLAG .
    Can anyone give some idea to solved this problem
    Thank
    Tags: 650, error, flag, flags, help please, nvram, set, update, white
    • emujo
      Field Supervisor

      2,500+ Posts
      • Jun 2009
      • 3009
      #2
      Power on in 3/C mode, select 1 and start. This will clear NVRAM flags. If this does not help, you'll probably need the EEPROM chips and the jigs. Emujo
      If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

        Comment

        • Dongcb
          #3
          Hi Emujo - Thanks for good advice
          I've replaced NVRam M48Y08 of sys board.I have solved the problem
          Thank

            Comment

            Previous template Next
            Working...