toshiba e studio 352

[Guest]

i have e studio 352 ..............
this machine devloping unit drive clutch not working . machine give very light copy. due to not rotate the devloping roller.
can any one help me how i chek by simulation this ctutch. or any sugation pls..................
thanks

[esam ramadan]

puch the gear near this cluch forwared and it'll wrok good luck i faced this problem in the same modle and it now work

[Paper_path]

Gear

I may be thinking of a different machine, but I think there might be a gear behind the developer clutch. Check that it's not damaged.

[ezzysi]

Theres a gear in the main drive assy that drives the dev unit, it has a flat that wears round and loses drive, this is a known issue to toshiba.
To remove the drive you'll need to take off, rear cover, main pcb, fans and ducting, aligning clutch and main motor. The drive then comes off as one block.
The gears on the dev tank wear out quite regularly too.
Good luck.

[delhi_ngg_rhc]

thanks to all i repaer the machine last sat day found gear faulty.
thanks to all for help.