E-Studio 3500C Service codes C445 and C448

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • wulffservice
    Service Team ******
    • Jul 2009
    • 29
    #1

    E-Studio 3500C Service codes C445 and C448

    Looking for some help on these two codes....any help would be appreciated


    Thanks
    Tags: None
    • Mr Spock
      Vulcan Inventor of Death

      1,000+ Posts
      • Aug 2006
      • 2064
      #2
      These are fuser temp codes. reset and if it returns then parts will be needed. Also check and make sure that the pressure screws are all the way in.
      And Star Trek was just a tv show...yeah right!

        Comment

        • JustManuals
          Field Supervisor

          5,000+ Posts
          • Jan 2006
          • 9838
          #3
          This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from The Internet's largest collection of manuals


          Paul@justmanuals.com

            Comment

            • emujo
              Field Supervisor

              2,500+ Posts
              • Jun 2009
              • 3009
              #4
              There is a firmare update that resolves some of the C4xx codes. main ver 15 I think.
              If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

                Comment

                • Pop Tart
                  #5
                  You need to do an 08-400 to clear the CFS. I would alsocheck to see if there was a piece of paper blocking the thermopiles in the fuser.

                    Comment

                    Previous template Next
                    Working...