GL-1010 lost password

[copy_kid]

Hi guys,

I have a Toshiba e-Studio 45 with GL-1010 controller.
I have lost the admin password...I have tried 12345, it's not working...it's been changed . Can anybody please tell me how can I change or reset the admin password? I would relly apreciate it.

Thanks

[Boogotshot]

GL-1010 administators guide does not have any info about recovering lost admin passwords. The default password is 12345 but if someone else has changed it then you will need to have the new password in order to get into the administrators mode. Most people by default are lazy so try the obvious ones. 11111 - 22222 - 33333 and so on.

[mckinley]

try sysadm as the password ( note you may need to access the GL1010 through top access to type in the letters as the screen of the copier only allows numbers if i remember correctly )

[sergei]

there is system password for gl1010 and gl1020. but i cant recall it at this time. give me a couple of days and i post it.

cheers

[ToshiBoy]

Password for GL-1010

there is system password for gl1010 and gl1020. but i cant recall it at this time. give me a couple of days and i post it.

cheers

The master password for the GL-1010 and 1020 is "349845"

hope this helps

[sergei]

The master password for the GL-1010 and 1020 is "349845"

hope this helps

bro, you're right on the master password.

[joelio18]

Where do you type the master password in?

[ToshiBoy]

When you enter the Admin section of the controller. The password field will only allow 5 characters unless you use the master password