E-studio 200 network settings diabled

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • SK_upholstery
    Technician
    • Feb 2010
    • 19
    #1

    E-studio 200 network settings diabled

    I just bought this copier about 3 months ago. Was able to set up the networking feature to connect to my windows computer. Been printing invoices and everything else fine. Yesterday I go and print an invoice, nothing happens. Computer say printing error.
    Go to the copier and check the setting and it says networking disabled. Does anyone know the code or have a list of codes so I can enable the networking feature?
    Any help would be appreciated.
    Thanks Scott
    Tags: 200, check, code, codes, computer, connect, copier, e-studio, e-studio 20, ect, error, feature, fine, nec, network, networking, printing, set, setting, settings, sold, studio, usb, windows, work
    • ivovb
      Senior Tech

      500+ Posts
      • Apr 2008
      • 695
      #2
      Find local Toshiba representative.

      BR
      I'll never ask if I didn't check user manual, service manual, parts list, BSI/TNI/TAD... web, existing threads.

        Comment

        • Mr Spock
          Vulcan Inventor of Death

          1,000+ Posts
          • Aug 2006
          • 2064
          #3
          look by the nic card and see if there is thumbdrive like unit plugged in. If not then you will need one if there is then it could be the nic card is bad.
          And Star Trek was just a tv show...yeah right!

            Comment

            • emujo
              Field Supervisor

              2,500+ Posts
              • Jun 2009
              • 3009
              #4
              If you don't see a small USB looking jump drive sticking out of the port driectly below the ethernet connection, than the MFP was probably put in the "trial mode". This is a one time, 60 day period that the MFP can be used as a printer/scanner w/o the enabler. It cannot be turned back on. If the company that sold this to you claimed it was print enabled and there is no enabler, I would go after them to find one and get you back to printing capable. If you see a message on the LCD that says "network initializing" and does not go away, then you probbaly have a bad NIC. Should cost around $200 to fix with labor and a rplacement NIC. EMujo
              Last edited by emujo; 04-07-2010, 03:59 PM. Reason: spelling
              If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

                Comment

                Previous template Next
                Working...