estudio 210c error code F10

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • xiophyte
    #1

    estudio 210c error code F10

    Hey all,

    Can anyone help me out with this? I keep getting an error code F10. I know i has something to do with the HD. Just wondering if its safe to re-format the HD even though i don't have the firmware? Isn't the HD simply used for image storing during copying?

    Any help would be greatly appreciated!

    Thx in advance

    Jon
    Tags: 210c, code, control panel, copyi, error, estudio, even, f10, help, isn, off, pressed, used
    • mckinley
      Chief Twiddler

      100+ Posts
      • Dec 2006
      • 150
      #2
      you are ok to format the hdd, but it may require replacing
      no firmware should be required either way
      Happiness Is The Road.

        Comment

        • belette
          #3
          estudio 210c error code F10

          hi,

          please your help, you have repaired the error if so how because I have a photocopier toshiba e-studio 210c error marked with F10 and I can not repair it. Despite the formatting of the disk by a computer F10 always present.

          thank you for your reply

            Comment

            • stevemmp
              #4
              We have the same issue with a 310c

              Just wondering if you figured out how to clear the F10 code. We have the same problem with an E-Studio 310c (which is extremely similar to the 210c). We haven't had any luck with trying to repair and/or getting the machine back up and running.

                Comment

                • Mr Spock
                  Vulcan Inventor of Death

                  1,000+ Posts
                  • Aug 2006
                  • 2064
                  #5
                  You need to reformat the hard drive using the copier to format it.
                  It is an 08 service code (I don't have it right now). If formatting does not work then the hard drive will need to be replaced.
                  And Star Trek was just a tv show...yeah right!

                    Comment

                    • Travis06
                      Tech.

                      100+ Posts
                      • Feb 2008
                      • 193
                      #6
                      Speaking of e310/210 series. Can you use a fuser from a e210c in a e311c series?

                        Comment

                        • ivovb
                          Senior Tech

                          500+ Posts
                          • Apr 2008
                          • 695
                          #7
                          Originally posted by Travis06
                          Speaking of e310/210 series. Can you use a fuser from a e210c in a e311c series?
                          Yes if you have newest one version 6LA51096000.
                          BR
                          I'll never ask if I didn't check user manual, service manual, parts list, BSI/TNI/TAD... web, existing threads.

                            Comment

                            • belette
                              #8
                              Solution

                              Formatting of the HDD
                              <Procedure>
                              (1) Turen ON the power while the digital keys [0] and [8] are pressed simultaneously.
                              (2) Confirm that "Test Mode" is displayed on the control panel. Enter the code "690"
                              and press the [START] key. The display changes to "System Mode".
                              (3) Enter "2" and press the [SET] or [INTERRRUPT] key.
                              (4) [WAIT] is displayed.
                              (5) Turn OFF the power after the message [REBOOT THE MACHINE] is displayed.

                                Comment

                                Previous template Next
                                Working...