SC-2 controller and e-studio 80

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • marcelon

    #1

    SC-2 controller and e-studio 80

    Our e-studio 80 stops printing or scanning to email. Once it has been rebooted everything works again, but after while stops again. I'm suspecting the hard drive is about to crash. Any other suggestion.

    Thanks
  • decimal
    Technician

    50+ Posts
    • Aug 2006
    • 75

    #2
    i think you should replace HDD and you need the recovery CDROM

    Comment

    Working...