e2830c Printing Latent Image

[SalesServiceGuy]

My copier prints good quality except that it prints a faded image of the previous job printed on the latest job. This faded image is approx 1/4 of the original image stretching across the page.

Copier has approx. 50k on it. I have tried Calibration, Registration and cleaning the four developers units with the supplied wand.

Any suggestions.

[bojans]

Check neutralization lamp. Maybe its dirty or doesn't work.

[Mr Spock]

Check the fuser and cleaning blade of the transfer belt.

[cochimba]

check the fuser unit. check too the erasing leds. i had a machine with 200k and no present this problem