e-studio 280 - Power failure & 5 beeps when turn on power

[officework13]

I have an e-studio 280
i am a single users and the copier is hooked up via the network.
on the screen i see the following message on the upper right of the LCD.
Power failure
when i turn off the machine and turn it back on it will give 5 beeps at the time of turning on.

i have the unit plugged into a universal power supply but only on the surge protect side, not the battery and surge protect.

however, last week i had a power failure in the office (breaker flipped), not sure who was doing what in the building that caused it as my copier was on standby mode.

in any event, just wondering how to get rid of this message and beeps, or is there somehting wrong with the machine. it seems to work Fine.

thanks.
i

[bauer]

Have you pessed the FUNCTION CLEAR button 2 times?

[officework13]

Solved - power failure display.

Thanks.
that solved that problem.

i.

[jonezy999]

Power failure message means excactly what it says. Please make sure you are using the correct shut down proceedure for this box.

[Harry]

yep if not you get a hd problem in future