[Misc] Making "Mix size originals" default on a eStudio 600

[delosangeles]

Hello everyone

I was wondering if anyone could help me get into the Admin settings in the user tools to make "Mix size originals" the default setting. I needed the default password to make the change if that is where you make the adjustment or do you have to get into the service program modes?

Also if my client can not find the password, is there a way to reset it through the Service Programs?

I am a Ricoh tech so I am not as knowledgeable on the Toshiba line.

Thanks in advance for any help.

[ToshibaTech]

123456 or 08-673 (if memory serves) gives you the password.

[delosangeles]

Sweet

Thank you ! I will try that.

123456 or 08-673 (if memory serves) gives you the password.

[Claudio]

On some of the other Toshiba models I use mode 08-618 set it to 1 for mixed sized originals.

Power ON while holding 0 & 8, enter 618, Start (Print Key), change setting to 1.

[delosangeles]

Really?

Really? Sweet, I will remember that. Thanks! you guys are great!

On some of the other Toshiba models I use mode 08-618 set it to 1 for mixed sized originals.

Power ON while holding 0 & 8, enter 618, Start (Print Key), change setting to 1.